Walton Primo S5
Walton Primo S5 is a Walton firmware file listed under Walton, distributed as Walton_Primo_S5_MT6735_0204_V5893_13122017_6.0.zip with a download size of 2 GB. It is built for the MediaTek MT6735 chipset and runs Android 6.0 (Marshmallow), with a firmware build date of December 13, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 20 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Walton Primo S5
The Walton Primo S5 runs on Walton's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Walton Primo S5 a fresh start without the clutter that builds up over time. File Name: Walton_Primo_S5_MT6735_0204_V5893_13122017_6.0.zip File Size: 2 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the Walton Primo S5 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Walton Primo S5 |
|---|---|
| Package | Walton_Primo_S5_MT6735_0204_V5893_13122017_6.0.zip |
| Brand / Platform | Walton |
| Category | Walton |
| Chipset | MediaTek MT6735 |
| Android version | Android 6.0 (Marshmallow) |
| Build date | December 13, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Walton Primo S5 with SP Flash Tool
- Confirm Walton Primo S5 matches your exact device model and that the phone uses the MT6735 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Walton Primo S5 free to download?
Yes, Walton Primo S5 can be downloaded free of charge from this page.
How large is the download?
The Walton Primo S5 package is 2 GB.
Which tool do I need to flash Walton Primo S5?
Walton Primo S5 is MediaTek MT6735 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Walton Primo S5?
This firmware is Android 6.0 (Marshmallow), built on December 13, 2017.
Which devices is this firmware for?
This file is intended for Walton devices. Always confirm it matches your specific model before flashing.