Walton Primo X4
Walton Primo X4 is a Walton firmware file listed under Walton, distributed as Walton_Primo_X4_MT6755_6.0.zip with a download size of 2 GB. It is built for the MediaTek MT6755 chipset and runs Android 6.0 (Marshmallow). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 36 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Walton Primo X4
Looking for the official stock firmware for your Walton Primo X4? You're in the right place. Below is the original Walton flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Walton Primo X4 back to square one. File Name: Walton_Primo_X4_MT6755_6.0.zip File Size: 2 GB Back up your files, charge the Walton Primo X4 past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Walton Primo X4 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Walton Primo X4 |
|---|---|
| Package | Walton_Primo_X4_MT6755_6.0.zip |
| Brand / Platform | Walton |
| Category | Walton |
| Chipset | MediaTek MT6755 |
| Android version | Android 6.0 (Marshmallow) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Walton Primo X4 with SP Flash Tool
- Confirm Walton Primo X4 matches your exact device model and that the phone uses the MT6755 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Walton Primo X4 free to download?
Yes, Walton Primo X4 can be downloaded free of charge from this page.
How large is the download?
The Walton Primo X4 package is 2 GB.
Which tool do I need to flash Walton Primo X4?
Walton Primo X4 is MediaTek MT6755 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Walton Primo X4?
This firmware is Android 6.0 (Marshmallow).
Which devices is this firmware for?
This file is intended for Walton devices. Always confirm it matches your specific model before flashing.