Walton Primo E10 Plus
Walton Primo E10 Plus is a Walton firmware file listed under Walton, distributed as Walton_Primo_E10_Plus_MT6580_S05_101019.zip with a download size of 589 MB. It is built for the MediaTek MT6580 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 13 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Walton Primo E10 Plus
If your Walton Primo E10 Plus has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Walton flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Walton Primo E10 Plus back to square one. File Name: Walton_Primo_E10_Plus_MT6580_S05_101019.zip File Size: 589 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Walton Primo E10 Plus returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Walton Primo E10 Plus |
|---|---|
| Package | Walton_Primo_E10_Plus_MT6580_S05_101019.zip |
| Brand / Platform | Walton |
| Category | Walton |
| Chipset | MediaTek MT6580 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 589 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Walton Primo E10 Plus with SP Flash Tool
- Confirm Walton Primo E10 Plus matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (589 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Walton Primo E10 Plus free to download?
Yes, Walton Primo E10 Plus can be downloaded free of charge from this page.
How large is the download?
The Walton Primo E10 Plus package is 589 MB.
Which tool do I need to flash Walton Primo E10 Plus?
Walton Primo E10 Plus is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Walton devices. Always confirm it matches your specific model before flashing.