Vertex

Vertex K200

Vertex_K200_SC6531_V0.8_080714_FSPD.zip
April 28, 2026 Vertex 4 MB Vertex

Vertex K200 is a Vertex firmware file listed under Vertex, distributed as Vertex_K200_SC6531_V0.8_080714_FSPD.zip with a download size of 4 MB. It is built for the Unisoc (Spreadtrum) SC6531 chipset. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 23 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
4 MB
Download Free

About Vertex K200

Vertex K200 Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Vertex_K200_SC6531_V0.8_080714_FSPD.zip File Size: 4 MB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial Get Link

File Details

File nameVertex K200
PackageVertex_K200_SC6531_V0.8_080714_FSPD.zip
Brand / PlatformVertex
CategoryVertex
ChipsetUnisoc (Spreadtrum) SC6531
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size4 MB
Date addedApril 28, 2026
PriceFree

How to flash Vertex K200 with SPD ResearchDownload

  1. Confirm Vertex K200 matches your exact device model and that the phone uses the SC6531 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (4 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Vertex K200 free to download?

Yes, Vertex K200 can be downloaded free of charge from this page.

How large is the download?

The Vertex K200 package is 4 MB.

Which tool do I need to flash Vertex K200?

Vertex K200 is Unisoc (Spreadtrum) SC6531 firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.

More Vertex files

Back to Vertex