Vertex

Vertex Impress Wolf

Vertex_Impress_Wolf_HW1_R1M_V12_20181120_SPD.zip
April 28, 2026 Vertex 1 GB Vertex

Vertex Impress Wolf is a Vertex firmware file listed under Vertex, distributed as Vertex_Impress_Wolf_HW1_R1M_V12_20181120_SPD.zip with a download size of 1 GB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of November 20, 2018. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About Vertex Impress Wolf

Vertex Impress Wolf Stock Firmware (Flash File) The Flash File will help you to Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. The Flash File (ROM) also helps you to repair the Mobile device, if it is facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Vertex_Impress_Wolf_HW1_R1M_V12_20181120_SPD.zip File Size: 1 GB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial Mirror 1 (Free)Mirror 2 (Paid)

File Details

File nameVertex Impress Wolf
PackageVertex_Impress_Wolf_HW1_R1M_V12_20181120_SPD.zip
Brand / PlatformVertex
CategoryVertex
PlatformUnisoc (Spreadtrum)
Build dateNovember 20, 2018
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1 GB
Date addedApril 28, 2026
PriceFree

How to flash Vertex Impress Wolf with SPD ResearchDownload

  1. Confirm Vertex Impress Wolf matches your exact device model and that it is intended for Vertex hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Vertex Impress Wolf free to download?

Yes, Vertex Impress Wolf can be downloaded free of charge from this page.

How large is the download?

The Vertex Impress Wolf package is 1 GB.

Which tool do I need to flash Vertex Impress Wolf?

Vertex Impress Wolf is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.

More Vertex files

Back to Vertex