Vertex

Vertex Impress Fun Stock Firmware

Vertex_Impress_Fun_SC7731_20160827_5.1.zip
June 16, 2026 Vertex 5063 MB Vertex

Vertex Impress Fun Stock Firmware is a Vertex firmware file listed under Vertex, distributed as Vertex_Impress_Fun_SC7731_20160827_5.1.zip with a download size of 5063 MB. It is built for the Unisoc (Spreadtrum) SC7731 chipset and runs Android 5.1 (Lollipop), with a firmware build date of August 27, 2016. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
5063 MB
Download Free

About Vertex Impress Fun Stock Firmware

Here you will find all the latest Vertex firmware for Vertex Impress Fun. If you are looking for Vertex Impress Fun stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Vertex Impress Fun, if it is not, then flashing the below stock firmware can brick your device. The Vertex Impress Fun firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Vertex Impress Fun Firmware File Name : Vertex_Impress_Fun_SC7731_20160827_5.1.zip File Size : 5063 MB Android OS Version : 5.1 Get Firmware Also: Vertex Impress Disco Stock Firmware How To Flash Vertex Impress Fun Stock Firmware Download and extract the Vertex Impress Fun firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Vertex Impress Fun firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Vertex Impress Fun device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Vertex Impress Fun device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U

File Details

File nameVertex Impress Fun Stock Firmware
PackageVertex_Impress_Fun_SC7731_20160827_5.1.zip
Brand / PlatformVertex
CategoryVertex
ChipsetUnisoc (Spreadtrum) SC7731
Android versionAndroid 5.1 (Lollipop)
Build dateAugust 27, 2016
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size5063 MB
Date addedJune 16, 2026
PriceFree

How to flash Vertex Impress Fun Stock Firmware with SPD ResearchDownload

  1. Confirm Vertex Impress Fun Stock Firmware matches your exact device model and that the phone uses the SC7731 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (5063 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Vertex Impress Fun Stock Firmware free to download?

Yes, Vertex Impress Fun Stock Firmware can be downloaded free of charge from this page.

How large is the download?

The Vertex Impress Fun Stock Firmware package is 5063 MB.

Which tool do I need to flash Vertex Impress Fun Stock Firmware?

Vertex Impress Fun Stock Firmware is Unisoc (Spreadtrum) SC7731 firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

What Android version is Vertex Impress Fun Stock Firmware?

This firmware is Android 5.1 (Lollipop), built on August 27, 2016.

Which devices is this firmware for?

This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.

More Vertex files

Back to Vertex