Vertex

Vertex Impress Fun

Vertex_Impress_Fun_SC7731_20160827_5.1.zip
April 28, 2026 Vertex 503 MB Vertex

Vertex Impress Fun is a Vertex firmware file listed under Vertex, distributed as Vertex_Impress_Fun_SC7731_20160827_5.1.zip with a download size of 503 MB. It is built for the Unisoc (Spreadtrum) SC7731 chipset and runs Android 5.1 (Lollipop), with a firmware build date of August 27, 2016. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
503 MB
Download Free

About Vertex Impress Fun

Vertex Impress Fun Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Vertex_Impress_Fun_SC7731_20160827_5.1.zip File Size: 503 MB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial (Mediafire)

File Details

File nameVertex Impress Fun
PackageVertex_Impress_Fun_SC7731_20160827_5.1.zip
Brand / PlatformVertex
CategoryVertex
ChipsetUnisoc (Spreadtrum) SC7731
Android versionAndroid 5.1 (Lollipop)
Build dateAugust 27, 2016
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size503 MB
Date addedApril 28, 2026
PriceFree

How to flash Vertex Impress Fun with SPD ResearchDownload

  1. Confirm Vertex Impress Fun matches your exact device model and that the phone uses the SC7731 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (503 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Vertex Impress Fun free to download?

Yes, Vertex Impress Fun can be downloaded free of charge from this page.

How large is the download?

The Vertex Impress Fun package is 503 MB.

Which tool do I need to flash Vertex Impress Fun?

Vertex Impress Fun is Unisoc (Spreadtrum) SC7731 firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

What Android version is Vertex Impress Fun?

This firmware is Android 5.1 (Lollipop), built on August 27, 2016.

Which devices is this firmware for?

This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.

More Vertex files

Back to Vertex