Vertex

Vertex Impress fire

Vertex_Impress_Fire_MT6739_20180504_8.1.0.zip
June 16, 2026 Vertex 1 GB Vertex

Vertex Impress fire is a Vertex firmware file listed under Vertex, distributed as Vertex_Impress_Fire_MT6739_20180504_8.1.0.zip with a download size of 1 GB. It is built for the MediaTek MT6739 chipset and runs Android 8.1 (Oreo), with a firmware build date of May 04, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 24 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About Vertex Impress fire

If your Vertex Impress fire has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Vertex flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Vertex Impress fire a fresh start without the clutter that builds up over time. File Name: Vertex_Impress_Fire_MT6739_20180504_8.1.0.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Vertex Impress fire should run like a brand new unit.

File Details

File nameVertex Impress fire
PackageVertex_Impress_Fire_MT6739_20180504_8.1.0.zip
Brand / PlatformVertex
CategoryVertex
ChipsetMediaTek MT6739
Android versionAndroid 8.1 (Oreo)
Build dateMay 04, 2018
Flash toolSP Flash Tool
Package formatZIP archive
File size1 GB
Date addedJune 16, 2026
PriceFree

How to flash Vertex Impress fire with SP Flash Tool

  1. Confirm Vertex Impress fire matches your exact device model and that the phone uses the MT6739 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Vertex Impress fire free to download?

Yes, Vertex Impress fire can be downloaded free of charge from this page.

How large is the download?

The Vertex Impress fire package is 1 GB.

Which tool do I need to flash Vertex Impress fire?

Vertex Impress fire is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Vertex Impress fire?

This firmware is Android 8.1 (Oreo), built on May 04, 2018.

Which devices is this firmware for?

This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.

More Vertex files

Back to Vertex