Vertex Impress Eclipse
Vertex Impress Eclipse is a Vertex firmware file listed under Vertex, distributed as Vertex_Impress_Eclipse_MT6739_HW1_R1_V03_20180713.zip with a download size of 1.2 MB. It is built for the MediaTek MT6739 chipset, with a firmware build date of July 13, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 17 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Vertex Impress Eclipse
The Vertex Impress Eclipse runs on Vertex's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Vertex Impress Eclipse back to square one. File Name: Vertex_Impress_Eclipse_MT6739_HW1_R1_V03_20180713.zip File Size: 1.2 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Vertex Impress Eclipse should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Vertex Impress Eclipse |
|---|---|
| Package | Vertex_Impress_Eclipse_MT6739_HW1_R1_V03_20180713.zip |
| Brand / Platform | Vertex |
| Category | Vertex |
| Chipset | MediaTek MT6739 |
| Build date | July 13, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.2 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Vertex Impress Eclipse with SP Flash Tool
- Confirm Vertex Impress Eclipse matches your exact device model and that the phone uses the MT6739 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.2 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6739 Firmware Guide: Flashing Tools and InstructionsThe MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Vertex Impress Eclipse free to download?
Yes, Vertex Impress Eclipse can be downloaded free of charge from this page.
How large is the download?
The Vertex Impress Eclipse package is 1.2 MB.
Which tool do I need to flash Vertex Impress Eclipse?
Vertex Impress Eclipse is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.