Lava

Lava R3 Note

Lava_R3_Note_MT6765_S112_21112018_8.1.zip.zip
June 16, 2026 Lava 2 GB Lava

Lava R3 Note is a Lava firmware file listed under Lava, distributed as Lava_R3_Note_MT6765_S112_21112018_8.1.zip.zip with a download size of 2 GB. It is built for the MediaTek MT6765 chipset and runs Android 8.1 (Oreo), with a firmware build date of November 21, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
2 GB
Download Free

About Lava R3 Note

If your Lava R3 Note has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Lava flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Lava R3 Note a fresh start without the clutter that builds up over time. File Name: Lava_R3_Note_MT6765_S112_21112018_8.1.zip.zip File Size: 2 GB Back up your files, charge the Lava R3 Note past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Lava R3 Note returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameLava R3 Note
PackageLava_R3_Note_MT6765_S112_21112018_8.1.zip.zip
Brand / PlatformLava
CategoryLava
ChipsetMediaTek MT6765
Android versionAndroid 8.1 (Oreo)
Build dateNovember 21, 2018
Flash toolSP Flash Tool
Package formatZIP archive
File size2 GB
Date addedJune 16, 2026
PriceFree

How to flash Lava R3 Note with SP Flash Tool

  1. Confirm Lava R3 Note matches your exact device model and that the phone uses the MT6765 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (2 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Lava R3 Note free to download?

Yes, Lava R3 Note can be downloaded free of charge from this page.

How large is the download?

The Lava R3 Note package is 2 GB.

Which tool do I need to flash Lava R3 Note?

Lava R3 Note is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Lava R3 Note?

This firmware is Android 8.1 (Oreo), built on November 21, 2018.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava