# Lava R3 Note

> Lava R3 Note is a Lava firmware file listed under Lava, distributed as Lava_R3_Note_MT6765_S112_21112018_8.1.zip.zip with a download size of 2 GB. It is built for the MediaTek MT6765 chipset and runs Android 8.1, with a firmware build date of November 21, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/lava-r3-note-104533>

## File details

- **File name:** Lava R3 Note
- **Package:** Lava_R3_Note_MT6765_S112_21112018_8.1.zip.zip
- **Brand / platform:** Lava
- **Category:** [Lava](https://www.filefirmware.com/category/lava)
- **Chipset:** MediaTek MT6765
- **Android version:** Android 8.1 (Oreo)
- **Build date:** November 21, 2018
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 2 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/lava-r3-note-104533>

## About Lava R3 Note

If your Lava R3 Note has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Lava flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Lava R3 Note a fresh start without the clutter that builds up over time. File Name: Lava_R3_Note_MT6765_S112_21112018_8.1.zip.zip File Size: 2 GB Back up your files, charge the Lava R3 Note past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Lava R3 Note returns to factory state. If something fails, verify the file matches your model and retry.

## How to flash Lava R3 Note with SP Flash Tool

1. Confirm Lava R3 Note matches your exact device model and that the phone uses the MT6765 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (2 GB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6765 Firmware Guide: Tools and Flashing Instructions](https://www.filefirmware.com/blog/mt6765-firmware-guide-tools-and-flashing-instructions): The MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…

## Frequently asked questions

### Is Lava R3 Note free to download?

Yes, Lava R3 Note can be downloaded free of charge from its web page.

### How large is the download?

The Lava R3 Note package is 2 GB.

### Which tool do I need to flash Lava R3 Note?

Lava R3 Note is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### What Android version is Lava R3 Note?

This firmware is Android 8.1 (Oreo), built on November 21, 2018.

### Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

## More Lava files

- [Lava Z3 LZG403](https://www.filefirmware.com/file/lava-z3-lzg403-104700) — 1.96 GB
- [Lava Z93P](https://www.filefirmware.com/file/lava-z93p-104619) — 1.59 GB
- [Lava Z93](https://www.filefirmware.com/file/lava-z93-104613) — 2 GB
- [Lava Z7H Plus](https://www.filefirmware.com/file/lava-z7h-plus-104612) — 286 MB
- [Lava Z71](https://www.filefirmware.com/file/lava-z71-104607) — 3 GB
- [Lava Z7H](https://www.filefirmware.com/file/lava-z7h-104604) — 271 MB
- [Lava Z7G](https://www.filefirmware.com/file/lava-z7g-104602) — 377 MB
- [Lava Z66](https://www.filefirmware.com/file/lava-z66-104600) — 1.6 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/lava-r3-note-104533>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
