Alcatel OneTouch 1050D
Alcatel OneTouch 1050D is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_1050D_SPD6531A_W25Q32BV_MIRA.zip with a download size of 3 MB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel OneTouch 1050D
The Alcatel OneTouch 1050D runs on Alcatel's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Alcatel OneTouch 1050D back to square one. File Name: Alcatel_OneTouch_1050D_SPD6531A_W25Q32BV_MIRA.zip File Size: 3 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Alcatel OneTouch 1050D restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Alcatel OneTouch 1050D |
|---|---|
| Package | Alcatel_OneTouch_1050D_SPD6531A_W25Q32BV_MIRA.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Platform | Unisoc (Spreadtrum) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 3 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel OneTouch 1050D with SPD ResearchDownload
- Confirm Alcatel OneTouch 1050D matches your exact device model and that it is intended for Alcatel hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (3 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Alcatel OneTouch 1050D free to download?
Yes, Alcatel OneTouch 1050D can be downloaded free of charge from this page.
How large is the download?
The Alcatel OneTouch 1050D package is 3 MB.
Which tool do I need to flash Alcatel OneTouch 1050D?
Alcatel OneTouch 1050D is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.