Alcatel One Touch Pop C3 4033X
Alcatel One Touch Pop C3 4033X is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Pop_C3_4033X_MT6572_France.zip with a download size of 604 MB. It is built for the MediaTek MT6572 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 8 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel One Touch Pop C3 4033X
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Alcatel One Touch Pop C3 4033X owners, this page hosts the original Alcatel stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Alcatel One Touch Pop C3 4033X a fresh start without the clutter that builds up over time. File Name: Alcatel_OneTouch_Pop_C3_4033X_MT6572_France.zip File Size: 604 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Alcatel One Touch Pop C3 4033X should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Alcatel One Touch Pop C3 4033X |
|---|---|
| Package | Alcatel_OneTouch_Pop_C3_4033X_MT6572_France.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6572 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 604 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel One Touch Pop C3 4033X with SP Flash Tool
- Confirm Alcatel One Touch Pop C3 4033X matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (604 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel One Touch Pop C3 4033X free to download?
Yes, Alcatel One Touch Pop C3 4033X can be downloaded free of charge from this page.
How large is the download?
The Alcatel One Touch Pop C3 4033X package is 604 MB.
Which tool do I need to flash Alcatel One Touch Pop C3 4033X?
Alcatel One Touch Pop C3 4033X is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.