Alcatel One Touch Pop C3 4033A
Alcatel One Touch Pop C3 4033A is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Pop_C3_4033A_MT6572_4.2.2.zip with a download size of 462 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.2 (Jelly Bean). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel One Touch Pop C3 4033A
Looking for the official stock firmware for your Alcatel One Touch Pop C3 4033A? You're in the right place. Below is the original Alcatel flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Alcatel_OneTouch_Pop_C3_4033A_MT6572_4.2.2.zip File Size: 462 MB Back up your files, charge the Alcatel One Touch Pop C3 4033A past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Alcatel One Touch Pop C3 4033A returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Alcatel One Touch Pop C3 4033A |
|---|---|
| Package | Alcatel_OneTouch_Pop_C3_4033A_MT6572_4.2.2.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6572 |
| Android version | Android 4.2 (Jelly Bean) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 462 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel One Touch Pop C3 4033A with SP Flash Tool
- Confirm Alcatel One Touch Pop C3 4033A matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (462 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel One Touch Pop C3 4033A free to download?
Yes, Alcatel One Touch Pop C3 4033A can be downloaded free of charge from this page.
How large is the download?
The Alcatel One Touch Pop C3 4033A package is 462 MB.
Which tool do I need to flash Alcatel One Touch Pop C3 4033A?
Alcatel One Touch Pop C3 4033A is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alcatel One Touch Pop C3 4033A?
This firmware is Android 4.2 (Jelly Bean).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.