Alcatel One Touch Pop C2 4032D
Alcatel One Touch Pop C2 4032D is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Pop_C2_4032D_MT6572.zip with a download size of 657 MB. It is built for the MediaTek MT6572 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel One Touch Pop C2 4032D
The Alcatel One Touch Pop C2 4032D runs on Alcatel's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Alcatel_OneTouch_Pop_C2_4032D_MT6572.zip File Size: 657 MB Back up your files, charge the Alcatel One Touch Pop C2 4032D past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Alcatel One Touch Pop C2 4032D should run like a brand new unit.
File Details
| File name | Alcatel One Touch Pop C2 4032D |
|---|---|
| Package | Alcatel_OneTouch_Pop_C2_4032D_MT6572.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6572 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 657 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel One Touch Pop C2 4032D with SP Flash Tool
- Confirm Alcatel One Touch Pop C2 4032D matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (657 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel One Touch Pop C2 4032D free to download?
Yes, Alcatel One Touch Pop C2 4032D can be downloaded free of charge from this page.
How large is the download?
The Alcatel One Touch Pop C2 4032D package is 657 MB.
Which tool do I need to flash Alcatel One Touch Pop C2 4032D?
Alcatel One Touch Pop C2 4032D is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.