Alcatel One Touch Pixi 3 5017X
Alcatel One Touch Pixi 3 5017X is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Pixi_3_5017X_MT6735M_5.1.zip with a download size of 1 GB. It is built for the MediaTek MT6735M chipset and runs Android 5.1 (Lollipop). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 8 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel One Touch Pixi 3 5017X
Looking for the official stock firmware for your Alcatel One Touch Pixi 3 5017X? You're in the right place. Below is the original Alcatel flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Alcatel One Touch Pixi 3 5017X a fresh start without the clutter that builds up over time. File Name: Alcatel_OneTouch_Pixi_3_5017X_MT6735M_5.1.zip File Size: 1 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the Alcatel One Touch Pixi 3 5017X restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Alcatel One Touch Pixi 3 5017X |
|---|---|
| Package | Alcatel_OneTouch_Pixi_3_5017X_MT6735M_5.1.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6735M |
| Android version | Android 5.1 (Lollipop) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel One Touch Pixi 3 5017X with SP Flash Tool
- Confirm Alcatel One Touch Pixi 3 5017X matches your exact device model and that the phone uses the MT6735M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Alcatel One Touch Pixi 3 5017X free to download?
Yes, Alcatel One Touch Pixi 3 5017X can be downloaded free of charge from this page.
How large is the download?
The Alcatel One Touch Pixi 3 5017X package is 1 GB.
Which tool do I need to flash Alcatel One Touch Pixi 3 5017X?
Alcatel One Touch Pixi 3 5017X is MediaTek MT6735M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alcatel One Touch Pixi 3 5017X?
This firmware is Android 5.1 (Lollipop).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.