Alcatel One Touch Pixi 3 5017D
Alcatel One Touch Pixi 3 5017D is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Pixi_3_5017D_MT6735M.zip with a download size of 600 MB. It is built for the MediaTek MT6735M chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel One Touch Pixi 3 5017D
The Alcatel One Touch Pixi 3 5017D runs on Alcatel's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Alcatel One Touch Pixi 3 5017D to factory condition. File Name: Alcatel_OneTouch_Pixi_3_5017D_MT6735M.zip File Size: 600 MB Back up your files, charge the Alcatel One Touch Pixi 3 5017D past 50 percent, install the matching drivers, and only then begin. When it finishes, the Alcatel One Touch Pixi 3 5017D restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Alcatel One Touch Pixi 3 5017D |
|---|---|
| Package | Alcatel_OneTouch_Pixi_3_5017D_MT6735M.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6735M |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 600 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel One Touch Pixi 3 5017D with SP Flash Tool
- Confirm Alcatel One Touch Pixi 3 5017D matches your exact device model and that the phone uses the MT6735M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (600 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Alcatel One Touch Pixi 3 5017D free to download?
Yes, Alcatel One Touch Pixi 3 5017D can be downloaded free of charge from this page.
How large is the download?
The Alcatel One Touch Pixi 3 5017D package is 600 MB.
Which tool do I need to flash Alcatel One Touch Pixi 3 5017D?
Alcatel One Touch Pixi 3 5017D is MediaTek MT6735M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.