Alcatel One Touch Pixi 3 4013K
Alcatel One Touch Pixi 3 4013K is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Pixi_3_4013K_MT6572_Bangladesh.zip with a download size of 921 MB. It is built for the MediaTek MT6572 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 8 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel One Touch Pixi 3 4013K
Looking for the official stock firmware for your Alcatel One Touch Pixi 3 4013K? You're in the right place. Below is the original Alcatel flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Alcatel One Touch Pixi 3 4013K back to square one. File Name: Alcatel_OneTouch_Pixi_3_4013K_MT6572_Bangladesh.zip File Size: 921 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Alcatel One Touch Pixi 3 4013K returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Alcatel One Touch Pixi 3 4013K |
|---|---|
| Package | Alcatel_OneTouch_Pixi_3_4013K_MT6572_Bangladesh.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6572 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 921 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel One Touch Pixi 3 4013K with SP Flash Tool
- Confirm Alcatel One Touch Pixi 3 4013K matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (921 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel One Touch Pixi 3 4013K free to download?
Yes, Alcatel One Touch Pixi 3 4013K can be downloaded free of charge from this page.
How large is the download?
The Alcatel One Touch Pixi 3 4013K package is 921 MB.
Which tool do I need to flash Alcatel One Touch Pixi 3 4013K?
Alcatel One Touch Pixi 3 4013K is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.