Alcatel One Touch P323X
Alcatel One Touch P323X is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_P323X_MT6582_2MVDHU2.zip with a download size of 774 MB. It is built for the MediaTek MT6582 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel One Touch P323X
Looking for the official stock firmware for your Alcatel One Touch P323X? You're in the right place. Below is the original Alcatel flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Alcatel One Touch P323X back to square one. File Name: Alcatel_OneTouch_P323X_MT6582_2MVDHU2.zip File Size: 774 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Alcatel One Touch P323X should run like a brand new unit.
File Details
| File name | Alcatel One Touch P323X |
|---|---|
| Package | Alcatel_OneTouch_P323X_MT6582_2MVDHU2.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6582 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 774 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel One Touch P323X with SP Flash Tool
- Confirm Alcatel One Touch P323X matches your exact device model and that the phone uses the MT6582 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (774 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Alcatel One Touch P323X free to download?
Yes, Alcatel One Touch P323X can be downloaded free of charge from this page.
How large is the download?
The Alcatel One Touch P323X package is 774 MB.
Which tool do I need to flash Alcatel One Touch P323X?
Alcatel One Touch P323X is MediaTek MT6582 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.