Alcatel One Touch 4110E
Alcatel One Touch 4110E is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_TPop_4110E_MT6575_FALCAR2.zip with a download size of 124 MB. It is built for the MediaTek MT6575 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel One Touch 4110E
Looking for the official stock firmware for your Alcatel One Touch 4110E? You're in the right place. Below is the original Alcatel flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Alcatel_OneTouch_TPop_4110E_MT6575_FALCAR2.zip File Size: 124 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Alcatel One Touch 4110E should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Alcatel One Touch 4110E |
|---|---|
| Package | Alcatel_OneTouch_TPop_4110E_MT6575_FALCAR2.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6575 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 124 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel One Touch 4110E with SP Flash Tool
- Confirm Alcatel One Touch 4110E matches your exact device model and that the phone uses the MT6575 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (124 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Alcatel One Touch 4110E free to download?
Yes, Alcatel One Touch 4110E can be downloaded free of charge from this page.
How large is the download?
The Alcatel One Touch 4110E package is 124 MB.
Which tool do I need to flash Alcatel One Touch 4110E?
Alcatel One Touch 4110E is MediaTek MT6575 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.