Alcatel Idol Mini 6012A
Alcatel Idol Mini 6012A is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Idol_Mini_6012A_MT6572_20171220_6.0.zip with a download size of 474 MB. It is built for the MediaTek MT6572 chipset and runs Android 6.0 (Marshmallow), with a firmware build date of December 20, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel Idol Mini 6012A
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Alcatel Idol Mini 6012A owners, this page hosts the original Alcatel stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Alcatel_OneTouch_Idol_Mini_6012A_MT6572_20171220_6.0.zip File Size: 474 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Alcatel Idol Mini 6012A should run like a brand new unit.
File Details
| File name | Alcatel Idol Mini 6012A |
|---|---|
| Package | Alcatel_OneTouch_Idol_Mini_6012A_MT6572_20171220_6.0.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6572 |
| Android version | Android 6.0 (Marshmallow) |
| Build date | December 20, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 474 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel Idol Mini 6012A with SP Flash Tool
- Confirm Alcatel Idol Mini 6012A matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (474 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel Idol Mini 6012A free to download?
Yes, Alcatel Idol Mini 6012A can be downloaded free of charge from this page.
How large is the download?
The Alcatel Idol Mini 6012A package is 474 MB.
Which tool do I need to flash Alcatel Idol Mini 6012A?
Alcatel Idol Mini 6012A is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alcatel Idol Mini 6012A?
This firmware is Android 6.0 (Marshmallow), built on December 20, 2017.
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.