Alcatel Go Flip 4044N
Alcatel Go Flip 4044N is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Go_Flip_4044N_MSM8909_28032018_6.0.1_QFIL.zip with a download size of 282 MB. It is built for the Qualcomm MSM8909 chipset and runs Android 6.0 (Marshmallow), with a firmware build date of March 28, 2018. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel Go Flip 4044N
If your Alcatel Go Flip 4044N has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Alcatel flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Alcatel Go Flip 4044N to factory condition. File Name: Alcatel_OneTouch_Go_Flip_4044N_MSM8909_28032018_6.0.1_QFIL.zip File Size: 282 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Alcatel Go Flip 4044N should run like a brand new unit.
File Details
| File name | Alcatel Go Flip 4044N |
|---|---|
| Package | Alcatel_OneTouch_Go_Flip_4044N_MSM8909_28032018_6.0.1_QFIL.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | Qualcomm MSM8909 |
| Android version | Android 6.0 (Marshmallow) |
| Build date | March 28, 2018 |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 282 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel Go Flip 4044N with QFIL
- Confirm Alcatel Go Flip 4044N matches your exact device model and that the phone uses the MSM8909 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (282 MB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
- How to Use QFIL: Qualcomm Firmware Flashing GuideQFIL (Qualcomm Flash Image Loader) is a specialized software tool used to flash stock firmware onto devices powered by Qualcomm chipsets. It is part of the Qualcomm QPST (Qualcomm Product Support…
Frequently asked questions
Is Alcatel Go Flip 4044N free to download?
Yes, Alcatel Go Flip 4044N can be downloaded free of charge from this page.
How large is the download?
The Alcatel Go Flip 4044N package is 282 MB.
Which tool do I need to flash Alcatel Go Flip 4044N?
Alcatel Go Flip 4044N is Qualcomm MSM8909 firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
What Android version is Alcatel Go Flip 4044N?
This firmware is Android 6.0 (Marshmallow), built on March 28, 2018.
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.