Advan S4R
Advan S4R is a Advan firmware file listed under Advan, distributed as Advan_S3_V1.0_MT6572_24092014_4.2.zip with a download size of 234 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.2 (Jelly Bean), with a firmware build date of September 24, 2014. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Advan S4R
Looking for the official stock firmware for your Advan S4R? You're in the right place. Below is the original Advan flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Advan_S3_V1.0_MT6572_24092014_4.2.zip File Size: 234 MB Back up your files, charge the Advan S4R past 50 percent, install the matching drivers, and only then begin. Once installed, your Advan S4R should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Advan S4R |
|---|---|
| Package | Advan_S3_V1.0_MT6572_24092014_4.2.zip |
| Brand / Platform | Advan |
| Category | Advan |
| Chipset | MediaTek MT6572 |
| Android version | Android 4.2 (Jelly Bean) |
| Build date | September 24, 2014 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 234 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Advan S4R with SP Flash Tool
- Confirm Advan S4R matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (234 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Advan S4R free to download?
Yes, Advan S4R can be downloaded free of charge from this page.
How large is the download?
The Advan S4R package is 234 MB.
Which tool do I need to flash Advan S4R?
Advan S4R is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Advan S4R?
This firmware is Android 4.2 (Jelly Bean), built on September 24, 2014.
Which devices is this firmware for?
This file is intended for Advan devices. Always confirm it matches your specific model before flashing.