Advan T1X Pro P7056
Advan T1X Pro P7056 is a Advan firmware file listed under Advan, distributed as Advan_T1X_Pro_P7056_MT8392_V08_20150130_4.4.2.zip with a download size of 588 MB. It is built for the MediaTek MT8392 chipset and runs Android 4.4 (KitKat), with a firmware build date of January 30, 2015. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Advan T1X Pro P7056
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Advan T1X Pro P7056 owners, this page hosts the original Advan stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Advan_T1X_Pro_P7056_MT8392_V08_20150130_4.4.2.zip File Size: 588 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Advan T1X Pro P7056 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Advan T1X Pro P7056 |
|---|---|
| Package | Advan_T1X_Pro_P7056_MT8392_V08_20150130_4.4.2.zip |
| Brand / Platform | Advan |
| Category | Advan |
| Chipset | MediaTek MT8392 |
| Android version | Android 4.4 (KitKat) |
| Build date | January 30, 2015 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 588 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Advan T1X Pro P7056 with SP Flash Tool
- Confirm Advan T1X Pro P7056 matches your exact device model and that the phone uses the MT8392 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (588 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Advan T1X Pro P7056 free to download?
Yes, Advan T1X Pro P7056 can be downloaded free of charge from this page.
How large is the download?
The Advan T1X Pro P7056 package is 588 MB.
Which tool do I need to flash Advan T1X Pro P7056?
Advan T1X Pro P7056 is MediaTek MT8392 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Advan T1X Pro P7056?
This firmware is Android 4.4 (KitKat), built on January 30, 2015.
Which devices is this firmware for?
This file is intended for Advan devices. Always confirm it matches your specific model before flashing.