Advan T1X
Advan T1X is a Advan firmware file listed under Advan, distributed as Advan_T1X_MT8382_4.4.2_V01_20140725.zip with a download size of 477 MB. It is built for the MediaTek MT8382 chipset and runs Android 4.4 (KitKat), with a firmware build date of July 25, 2014. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 22 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Advan T1X
The Advan T1X runs on Advan's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Advan T1X to factory condition. File Name: Advan_T1X_MT8382_4.4.2_V01_20140725.zip File Size: 477 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Advan T1X restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Advan T1X |
|---|---|
| Package | Advan_T1X_MT8382_4.4.2_V01_20140725.zip |
| Brand / Platform | Advan |
| Category | Advan |
| Chipset | MediaTek MT8382 |
| Android version | Android 4.4 (KitKat) |
| Build date | July 25, 2014 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 477 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Advan T1X with SP Flash Tool
- Confirm Advan T1X matches your exact device model and that the phone uses the MT8382 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (477 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Advan T1X free to download?
Yes, Advan T1X can be downloaded free of charge from this page.
How large is the download?
The Advan T1X package is 477 MB.
Which tool do I need to flash Advan T1X?
Advan T1X is MediaTek MT8382 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Advan T1X?
This firmware is Android 4.4 (KitKat), built on July 25, 2014.
Which devices is this firmware for?
This file is intended for Advan devices. Always confirm it matches your specific model before flashing.