Advan E1C Plus
Advan E1C Plus is a Advan firmware file listed under Advan, distributed as Advan_E1C_Plus_MT6577_P7029_V05_4.2.2.zip with a download size of 350 MB. It is built for the MediaTek MT6577 chipset and runs Android 4.2 (Jelly Bean). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 13 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Advan E1C Plus
Looking for the official stock firmware for your Advan E1C Plus? You're in the right place. Below is the original Advan flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Advan E1C Plus back to square one. File Name: Advan_E1C_Plus_MT6577_P7029_V05_4.2.2.zip File Size: 350 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Advan E1C Plus restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Advan E1C Plus |
|---|---|
| Package | Advan_E1C_Plus_MT6577_P7029_V05_4.2.2.zip |
| Brand / Platform | Advan |
| Category | Advan |
| Chipset | MediaTek MT6577 |
| Android version | Android 4.2 (Jelly Bean) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 350 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Advan E1C Plus with SP Flash Tool
- Confirm Advan E1C Plus matches your exact device model and that the phone uses the MT6577 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (350 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Advan E1C Plus free to download?
Yes, Advan E1C Plus can be downloaded free of charge from this page.
How large is the download?
The Advan E1C Plus package is 350 MB.
Which tool do I need to flash Advan E1C Plus?
Advan E1C Plus is MediaTek MT6577 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Advan E1C Plus?
This firmware is Android 4.2 (Jelly Bean).
Which devices is this firmware for?
This file is intended for Advan devices. Always confirm it matches your specific model before flashing.