Homtom HT7 Pro Stock Firmware
Homtom HT7 Pro Stock Firmware is a Homtom firmware file listed under HomTom, distributed as Homtom_HT7_Pro_MT6735M_20161027_5.1.zip with a download size of 801 MB. It is built for the MediaTek MT6735M chipset and runs Android 5.1 (Lollipop), with a firmware build date of October 27, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 34 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Homtom HT7 Pro Stock Firmware
Here you will find all the latest Homtom firmware for Homtom HT7 Pro. If you are looking for Homtom HT7 Pro stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Homtom HT7 Pro, if it is not, then flashing the below stock firmware can brick your device. The Homtom HT7 Pro firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Homtom HT7 Pro Firmware File Name : Homtom_HT7_Pro_MT6735M_20161027_5.1.zip File Size : 801 MB Android OS Version : 5.1 Get Firmware Also: Homtom S8 Stock Firmware How To Flash Homtom HT7 Pro Stock Firmware Download and extract the Homtom HT7 Pro firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Homtom HT7 Pro firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Homtom HT7 Pro device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Homtom HT7 Pro device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Homtom HT7 Pro Stock Firmware |
|---|---|
| Package | Homtom_HT7_Pro_MT6735M_20161027_5.1.zip |
| Brand / Platform | Homtom |
| Category | HomTom |
| Chipset | MediaTek MT6735M |
| Android version | Android 5.1 (Lollipop) |
| Build date | October 27, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 801 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Homtom HT7 Pro Stock Firmware with SP Flash Tool
- Confirm Homtom HT7 Pro Stock Firmware matches your exact device model and that the phone uses the MT6735M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (801 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Homtom HT7 Pro Stock Firmware free to download?
Yes, Homtom HT7 Pro Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Homtom HT7 Pro Stock Firmware package is 801 MB.
Which tool do I need to flash Homtom HT7 Pro Stock Firmware?
Homtom HT7 Pro Stock Firmware is MediaTek MT6735M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Homtom HT7 Pro Stock Firmware?
This firmware is Android 5.1 (Lollipop), built on October 27, 2016.
Which devices is this firmware for?
This file is intended for Homtom devices. Always confirm it matches your specific model before flashing.