Walton Primo S7 Pro
Walton Primo S7 Pro is a Walton firmware file listed under Walton, distributed as Walton_Primo_S7_Pro_MT6771_S08_060220.zip with a download size of 1.88 GB. It is built for the MediaTek MT6771 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 26 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Walton Primo S7 Pro
The Walton Primo S7 Pro runs on Walton's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Walton_Primo_S7_Pro_MT6771_S08_060220.zip File Size: 1.88 GB Back up your files, charge the Walton Primo S7 Pro past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Walton Primo S7 Pro returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Walton Primo S7 Pro |
|---|---|
| Package | Walton_Primo_S7_Pro_MT6771_S08_060220.zip |
| Brand / Platform | Walton |
| Category | Walton |
| Chipset | MediaTek MT6771 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.88 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Walton Primo S7 Pro with SP Flash Tool
- Confirm Walton Primo S7 Pro matches your exact device model and that the phone uses the MT6771 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.88 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Walton Primo S7 Pro free to download?
Yes, Walton Primo S7 Pro can be downloaded free of charge from this page.
How large is the download?
The Walton Primo S7 Pro package is 1.88 GB.
Which tool do I need to flash Walton Primo S7 Pro?
Walton Primo S7 Pro is MediaTek MT6771 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Walton devices. Always confirm it matches your specific model before flashing.