Walton Primo S7
Walton Primo S7 is a Walton firmware file listed under Walton, distributed as Walton_Primo_S7_MT6765_S03_28042019_9.0.zip with a download size of 2 GB. It is built for the MediaTek MT6765 chipset and runs Android 9 (Pie), with a firmware build date of April 28, 2019. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Walton Primo S7
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Walton Primo S7 owners, this page hosts the original Walton stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Walton Primo S7 back to square one. File Name: Walton_Primo_S7_MT6765_S03_28042019_9.0.zip File Size: 2 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Walton Primo S7 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Walton Primo S7 |
|---|---|
| Package | Walton_Primo_S7_MT6765_S03_28042019_9.0.zip |
| Brand / Platform | Walton |
| Category | Walton |
| Chipset | MediaTek MT6765 |
| Android version | Android 9 (Pie) |
| Build date | April 28, 2019 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Walton Primo S7 with SP Flash Tool
- Confirm Walton Primo S7 matches your exact device model and that the phone uses the MT6765 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6765 Firmware Guide: Tools and Flashing InstructionsThe MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Walton Primo S7 free to download?
Yes, Walton Primo S7 can be downloaded free of charge from this page.
How large is the download?
The Walton Primo S7 package is 2 GB.
Which tool do I need to flash Walton Primo S7?
Walton Primo S7 is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Walton Primo S7?
This firmware is Android 9 (Pie), built on April 28, 2019.
Which devices is this firmware for?
This file is intended for Walton devices. Always confirm it matches your specific model before flashing.