Walton Primo RX7
Walton Primo RX7 is a Walton firmware file listed under Walton, distributed as Walton_Primo_RX7_MT6763_V10_12102019.zip with a download size of 1.7 GB. It is built for the MediaTek MT6763 chipset, with a firmware build date of October 12, 2019. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 32 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Walton Primo RX7
If your Walton Primo RX7 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Walton flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Walton Primo RX7 to factory condition. File Name: Walton_Primo_RX7_MT6763_V10_12102019.zip File Size: 1.7 GB Back up your files, charge the Walton Primo RX7 past 50 percent, install the matching drivers, and only then begin. Once installed, your Walton Primo RX7 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Walton Primo RX7 |
|---|---|
| Package | Walton_Primo_RX7_MT6763_V10_12102019.zip |
| Brand / Platform | Walton |
| Category | Walton |
| Chipset | MediaTek MT6763 |
| Build date | October 12, 2019 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.7 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Walton Primo RX7 with SP Flash Tool
- Confirm Walton Primo RX7 matches your exact device model and that the phone uses the MT6763 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.7 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Walton Primo RX7 free to download?
Yes, Walton Primo RX7 can be downloaded free of charge from this page.
How large is the download?
The Walton Primo RX7 package is 1.7 GB.
Which tool do I need to flash Walton Primo RX7?
Walton Primo RX7 is MediaTek MT6763 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Walton devices. Always confirm it matches your specific model before flashing.