Walton Primo RX6
Walton Primo RX6 is a Walton firmware file listed under Walton, distributed as Walton_Primo_RX6_MT6737T_V06_16122018.zip with a download size of 1 GB. It is built for the MediaTek MT6737T chipset, with a firmware build date of December 16, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Walton Primo RX6
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Walton Primo RX6 owners, this page hosts the original Walton stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Walton Primo RX6 to factory condition. File Name: Walton_Primo_RX6_MT6737T_V06_16122018.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Walton Primo RX6 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Walton Primo RX6 |
|---|---|
| Package | Walton_Primo_RX6_MT6737T_V06_16122018.zip |
| Brand / Platform | Walton |
| Category | Walton |
| Chipset | MediaTek MT6737T |
| Build date | December 16, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Walton Primo RX6 with SP Flash Tool
- Confirm Walton Primo RX6 matches your exact device model and that the phone uses the MT6737T chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Walton Primo RX6 free to download?
Yes, Walton Primo RX6 can be downloaded free of charge from this page.
How large is the download?
The Walton Primo RX6 package is 1 GB.
Which tool do I need to flash Walton Primo RX6?
Walton Primo RX6 is MediaTek MT6737T firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Walton devices. Always confirm it matches your specific model before flashing.