Walton Primo RM4
Walton Primo RM4 is a Walton firmware file listed under Walton, distributed as Walton_Primo_RM4_MT6765_V09_20201126.zip with a download size of 3 GB. It is built for the MediaTek MT6765 chipset, with a firmware build date of November 26, 2020. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Walton Primo RM4
The Walton Primo RM4 runs on Walton's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Walton Primo RM4 to factory condition. File Name: Walton_Primo_RM4_MT6765_V09_20201126.zip File Size: 3 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Walton Primo RM4 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Walton Primo RM4 |
|---|---|
| Package | Walton_Primo_RM4_MT6765_V09_20201126.zip |
| Brand / Platform | Walton |
| Category | Walton |
| Chipset | MediaTek MT6765 |
| Build date | November 26, 2020 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 3 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Walton Primo RM4 with SP Flash Tool
- Confirm Walton Primo RM4 matches your exact device model and that the phone uses the MT6765 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (3 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6765 Firmware Guide: Tools and Flashing InstructionsThe MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Walton Primo RM4 free to download?
Yes, Walton Primo RM4 can be downloaded free of charge from this page.
How large is the download?
The Walton Primo RM4 package is 3 GB.
Which tool do I need to flash Walton Primo RM4?
Walton Primo RM4 is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Walton devices. Always confirm it matches your specific model before flashing.