Walton Primo NH5
Walton Primo NH5 is a Walton firmware file listed under Walton, distributed as Walton_Primo_NH5_MT6739_S10_250220.zip with a download size of 803 MB. It is built for the MediaTek MT6739 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Walton Primo NH5
The Walton Primo NH5 runs on Walton's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Walton_Primo_NH5_MT6739_S10_250220.zip File Size: 803 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Walton Primo NH5 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Walton Primo NH5 |
|---|---|
| Package | Walton_Primo_NH5_MT6739_S10_250220.zip |
| Brand / Platform | Walton |
| Category | Walton |
| Chipset | MediaTek MT6739 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 803 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Walton Primo NH5 with SP Flash Tool
- Confirm Walton Primo NH5 matches your exact device model and that the phone uses the MT6739 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (803 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6739 Firmware Guide: Flashing Tools and InstructionsThe MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Walton Primo NH5 free to download?
Yes, Walton Primo NH5 can be downloaded free of charge from this page.
How large is the download?
The Walton Primo NH5 package is 803 MB.
Which tool do I need to flash Walton Primo NH5?
Walton Primo NH5 is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Walton devices. Always confirm it matches your specific model before flashing.