Walton Primo HM5
Walton Primo HM5 is a Walton firmware file listed under Walton, distributed as Walton_Primo_HM5_MT6761_V13_20200822.zip with a download size of 3 GB. It is built for the MediaTek MT6761 chipset, with a firmware build date of August 22, 2020. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Walton Primo HM5
The Walton Primo HM5 runs on Walton's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Walton_Primo_HM5_MT6761_V13_20200822.zip File Size: 3 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Walton Primo HM5 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Walton Primo HM5 |
|---|---|
| Package | Walton_Primo_HM5_MT6761_V13_20200822.zip |
| Brand / Platform | Walton |
| Category | Walton |
| Chipset | MediaTek MT6761 |
| Build date | August 22, 2020 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 3 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Walton Primo HM5 with SP Flash Tool
- Confirm Walton Primo HM5 matches your exact device model and that the phone uses the MT6761 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (3 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Walton Primo HM5 free to download?
Yes, Walton Primo HM5 can be downloaded free of charge from this page.
How large is the download?
The Walton Primo HM5 package is 3 GB.
Which tool do I need to flash Walton Primo HM5?
Walton Primo HM5 is MediaTek MT6761 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Walton devices. Always confirm it matches your specific model before flashing.