Walton

Walton Primo F8

Walton_Primo_F8_MT6580_S03_12292017.zip
June 16, 2026 Walton 1 GB Walton

Walton Primo F8 is a Walton firmware file listed under Walton, distributed as Walton_Primo_F8_MT6580_S03_12292017.zip with a download size of 1 GB. It is built for the MediaTek MT6580 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 12 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About Walton Primo F8

Looking for the official stock firmware for your Walton Primo F8? You're in the right place. Below is the original Walton flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Walton_Primo_F8_MT6580_S03_12292017.zip File Size: 1 GB Back up your files, charge the Walton Primo F8 past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Walton Primo F8 returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameWalton Primo F8
PackageWalton_Primo_F8_MT6580_S03_12292017.zip
Brand / PlatformWalton
CategoryWalton
ChipsetMediaTek MT6580
Flash toolSP Flash Tool
Package formatZIP archive
File size1 GB
Date addedJune 16, 2026
PriceFree

How to flash Walton Primo F8 with SP Flash Tool

  1. Confirm Walton Primo F8 matches your exact device model and that the phone uses the MT6580 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Walton Primo F8 free to download?

Yes, Walton Primo F8 can be downloaded free of charge from this page.

How large is the download?

The Walton Primo F8 package is 1 GB.

Which tool do I need to flash Walton Primo F8?

Walton Primo F8 is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Walton devices. Always confirm it matches your specific model before flashing.

More Walton files

Back to Walton