Tecno F1 Stock Firmware
Tecno F1 Stock Firmware is a Tecno firmware file listed under Tecno, distributed as Tecno_F1_MT6580_V4_20181120_8.1.0.zip with a download size of 556 MB. It is built for the MediaTek MT6580 chipset and runs Android 8.1 (Oreo), with a firmware build date of November 20, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Tecno F1 Stock Firmware
Here you will find all the latest Tecno firmware for Tecno F1. If you are looking for Tecno F1 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Tecno F1, if it is not, then flashing the below stock firmware can brick your device. The Tecno F1 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Tecno F1 Firmware File Name : Tecno_F1_MT6580_V4_20181120_8.1.0.zip File Size : 556 MB Get Firmware File Name : Tecno_F1_MT6580_V6_181220.zip File Size : 691 MB Get Firmware File Name : Tecno_F1_MT6580_V7_190119.zip File Size : 722 MB Get Firmware File Name : Tecno_F1_MT6580_V13_191211.zip File Size : 662 MB Get Firmware File Name : Tecno_F1_MT6580_V16_191205.zip File Size : 708 MB Get Firmware Also: Tecno N9S Stock Firmware How To Flash Tecno F1 Stock Firmware Download and extract the Tecno F1 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Tecno F1 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Tecno F1 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Tecno F1 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Tecno F1 Stock Firmware |
|---|---|
| Package | Tecno_F1_MT6580_V4_20181120_8.1.0.zip |
| Brand / Platform | Tecno |
| Category | Tecno |
| Chipset | MediaTek MT6580 |
| Android version | Android 8.1 (Oreo) |
| Build date | November 20, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 556 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Tecno F1 Stock Firmware with SP Flash Tool
- Confirm Tecno F1 Stock Firmware matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (556 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Tecno F1 Stock Firmware free to download?
Yes, Tecno F1 Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Tecno F1 Stock Firmware package is 556 MB.
Which tool do I need to flash Tecno F1 Stock Firmware?
Tecno F1 Stock Firmware is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Tecno F1 Stock Firmware?
This firmware is Android 8.1 (Oreo), built on November 20, 2018.
Which devices is this firmware for?
This file is intended for Tecno devices. Always confirm it matches your specific model before flashing.