Tecno Spark 4 Lite KC8s
Tecno Spark 4 Lite KC8s is a Tecno firmware file listed under Tecno, distributed as Tecno_KC8S_MT6761_V34_200226 with a download size of 1.8GB. It is built for the MediaTek MT6761 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 17 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Tecno Spark 4 Lite KC8s
If your Tecno Spark 4 Lite KC8s has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Tecno flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Tecno_KC8S_MT6761_V34_200226 File Size: 1.8GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Tecno Spark 4 Lite KC8s returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Tecno Spark 4 Lite KC8s |
|---|---|
| Package | Tecno_KC8S_MT6761_V34_200226 |
| Brand / Platform | Tecno |
| Category | Tecno |
| Chipset | MediaTek MT6761 |
| Flash tool | SP Flash Tool |
| File size | 1.8GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Tecno Spark 4 Lite KC8s with SP Flash Tool
- Confirm Tecno Spark 4 Lite KC8s matches your exact device model and that the phone uses the MT6761 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.8GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Tecno Spark 4 Lite KC8s free to download?
Yes, Tecno Spark 4 Lite KC8s can be downloaded free of charge from this page.
How large is the download?
The Tecno Spark 4 Lite KC8s package is 1.8GB.
Which tool do I need to flash Tecno Spark 4 Lite KC8s?
Tecno Spark 4 Lite KC8s is MediaTek MT6761 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Tecno devices. Always confirm it matches your specific model before flashing.