Tecno KF6P
Tecno KF6P is a Tecno firmware file listed under Tecno, distributed as Tecno_KF6P_MT6765_V220_210422 with a download size of 1.8GB. It is built for the MediaTek MT6765 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 24 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Tecno KF6P
Looking for the official stock firmware for your Tecno KF6P? You're in the right place. Below is the original Tecno flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Tecno KF6P a fresh start without the clutter that builds up over time. File Name: Tecno_KF6P_MT6765_V220_210422 File Size: 1.8GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Tecno KF6P returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Tecno KF6P |
|---|---|
| Package | Tecno_KF6P_MT6765_V220_210422 |
| Brand / Platform | Tecno |
| Category | Tecno |
| Chipset | MediaTek MT6765 |
| Flash tool | SP Flash Tool |
| File size | 1.8GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Tecno KF6P with SP Flash Tool
- Confirm Tecno KF6P matches your exact device model and that the phone uses the MT6765 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.8GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6765 Firmware Guide: Tools and Flashing InstructionsThe MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Tecno KF6P free to download?
Yes, Tecno KF6P can be downloaded free of charge from this page.
How large is the download?
The Tecno KF6P package is 1.8GB.
Which tool do I need to flash Tecno KF6P?
Tecno KF6P is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Tecno devices. Always confirm it matches your specific model before flashing.