Tecno DroiPad 7C Pro
Tecno DroiPad 7C Pro is a Tecno firmware file listed under Tecno, distributed as Tecno_DroiPad_7C_Pro_MT6580_DP7CPRO_B1_L_160607_5.1.zip with a download size of 1.23 GB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop). It is flashed with SP Flash Tool. It was published on June 09, 2026. This page has been viewed 10 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Tecno DroiPad 7C Pro
Tecno DroiPad 7C Pro Stock ROM Firmware (Flash File) The Stock ROM (firmware) can be used to reinstall the operating system (OS) on the mobile device. It can be very handy when experiencing software errors, facing a device start-up loop, dealing with battery drain issues, or upgrading or downgrading the mobile OS. File Name: Tecno_DroiPad_7C_Pro_MT6580_DP7CPRO_B1_L_160607_5.1.zip File Size: 1.23 GB Flash Tool: SP Flash Tool for Windows | SP Flash Tool for Linux How-to Flash (install): Follow Tutorial Mirror 1 (Free)Mirror 2 (Paid)
File Details
| File name | Tecno DroiPad 7C Pro |
|---|---|
| Package | Tecno_DroiPad_7C_Pro_MT6580_DP7CPRO_B1_L_160607_5.1.zip |
| Brand / Platform | Tecno |
| Category | Tecno |
| Chipset | MediaTek MT6580 |
| Android version | Android 5.1 (Lollipop) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.23 GB |
| Date added | June 09, 2026 |
| Price | Free |
How to flash Tecno DroiPad 7C Pro with SP Flash Tool
- Confirm Tecno DroiPad 7C Pro matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.23 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Tecno DroiPad 7C Pro free to download?
Yes, Tecno DroiPad 7C Pro can be downloaded free of charge from this page.
How large is the download?
The Tecno DroiPad 7C Pro package is 1.23 GB.
Which tool do I need to flash Tecno DroiPad 7C Pro?
Tecno DroiPad 7C Pro is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Tecno DroiPad 7C Pro?
This firmware is Android 5.1 (Lollipop).
Which devices is this firmware for?
This file is intended for Tecno devices. Always confirm it matches your specific model before flashing.