Oppo X5 Clone
Oppo X5 Clone is a Oppo firmware file listed under Oppo, distributed as Oppo_X5_Clone_MT6580_V1.0.4_06302018_5.1.zip with a download size of 454 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 27 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Oppo X5 Clone
The Oppo X5 Clone runs on Oppo's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Oppo X5 Clone a fresh start without the clutter that builds up over time. File Name: Oppo_X5_Clone_MT6580_V1.0.4_06302018_5.1.zip File Size: 454 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Oppo X5 Clone should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Oppo X5 Clone |
|---|---|
| Package | Oppo_X5_Clone_MT6580_V1.0.4_06302018_5.1.zip |
| Brand / Platform | Oppo |
| Category | Oppo |
| Chipset | MediaTek MT6580 |
| Android version | Android 5.1 (Lollipop) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 454 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Oppo X5 Clone with SP Flash Tool
- Confirm Oppo X5 Clone matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (454 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Oppo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick an Oppo device, you must use a stock ROM that matches your specific model and chipset. Depending on the hardware, this typically involves using tools like SP Flash Tool for…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
Frequently asked questions
Is Oppo X5 Clone free to download?
Yes, Oppo X5 Clone can be downloaded free of charge from this page.
How large is the download?
The Oppo X5 Clone package is 454 MB.
Which tool do I need to flash Oppo X5 Clone?
Oppo X5 Clone is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Oppo X5 Clone?
This firmware is Android 5.1 (Lollipop).
Which devices is this firmware for?
This file is intended for Oppo devices. Always confirm it matches your specific model before flashing.