Oppo X7S Clone
Oppo X7S Clone is a Oppo firmware file listed under Oppo, distributed as Oppo_X7S_Clone_MT6572_100616_5.1.zip with a download size of 466 MB. It is built for the MediaTek MT6572 chipset and runs Android 5.1 (Lollipop). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 30 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Oppo X7S Clone
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Oppo X7S Clone owners, this page hosts the original Oppo stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Oppo X7S Clone back to square one. File Name: Oppo_X7S_Clone_MT6572_100616_5.1.zip File Size: 466 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Oppo X7S Clone restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Oppo X7S Clone |
|---|---|
| Package | Oppo_X7S_Clone_MT6572_100616_5.1.zip |
| Brand / Platform | Oppo |
| Category | Oppo |
| Chipset | MediaTek MT6572 |
| Android version | Android 5.1 (Lollipop) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 466 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Oppo X7S Clone with SP Flash Tool
- Confirm Oppo X7S Clone matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (466 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Oppo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick an Oppo device, you must use a stock ROM that matches your specific model and chipset. Depending on the hardware, this typically involves using tools like SP Flash Tool for…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
Frequently asked questions
Is Oppo X7S Clone free to download?
Yes, Oppo X7S Clone can be downloaded free of charge from this page.
How large is the download?
The Oppo X7S Clone package is 466 MB.
Which tool do I need to flash Oppo X7S Clone?
Oppo X7S Clone is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Oppo X7S Clone?
This firmware is Android 5.1 (Lollipop).
Which devices is this firmware for?
This file is intended for Oppo devices. Always confirm it matches your specific model before flashing.