Oppo Rino 3 Clone
Oppo Rino 3 Clone is a Oppo firmware file listed under Oppo, distributed as Oppo_Rino_3_Clone_MT6572_061120.zip with a download size of 396 MB. It is built for the MediaTek MT6572 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 23 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Oppo Rino 3 Clone
If your Oppo Rino 3 Clone has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Oppo flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Oppo Rino 3 Clone back to square one. File Name: Oppo_Rino_3_Clone_MT6572_061120.zip File Size: 396 MB Back up your files, charge the Oppo Rino 3 Clone past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Oppo Rino 3 Clone returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Oppo Rino 3 Clone |
|---|---|
| Package | Oppo_Rino_3_Clone_MT6572_061120.zip |
| Brand / Platform | Oppo |
| Category | Oppo |
| Chipset | MediaTek MT6572 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 396 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Oppo Rino 3 Clone with SP Flash Tool
- Confirm Oppo Rino 3 Clone matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (396 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Oppo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick an Oppo device, you must use a stock ROM that matches your specific model and chipset. Depending on the hardware, this typically involves using tools like SP Flash Tool for…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
Frequently asked questions
Is Oppo Rino 3 Clone free to download?
Yes, Oppo Rino 3 Clone can be downloaded free of charge from this page.
How large is the download?
The Oppo Rino 3 Clone package is 396 MB.
Which tool do I need to flash Oppo Rino 3 Clone?
Oppo Rino 3 Clone is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Oppo devices. Always confirm it matches your specific model before flashing.