Oppo Reno 8 5G CPH2359
Oppo Reno 8 5G CPH2359 is a Oppo firmware file listed under Oppo, distributed as Oppo_Reno_8_5G_CPH2359_MT6893_EX_11_A.10_220617.zip with a download size of 24.7 GB. It is built for the MediaTek MT6893 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 45 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Oppo Reno 8 5G CPH2359
Looking for the official stock firmware for your Oppo Reno 8 5G CPH2359? You're in the right place. Below is the original Oppo flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Oppo Reno 8 5G CPH2359 back to square one. File Name: Oppo_Reno_8_5G_CPH2359_MT6893_EX_11_A.10_220617.zip File Size: 24.7 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Oppo Reno 8 5G CPH2359 should run like a brand new unit.
File Details
| File name | Oppo Reno 8 5G CPH2359 |
|---|---|
| Package | Oppo_Reno_8_5G_CPH2359_MT6893_EX_11_A.10_220617.zip |
| Brand / Platform | Oppo |
| Category | Oppo |
| Chipset | MediaTek MT6893 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 24.7 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Oppo Reno 8 5G CPH2359 with SP Flash Tool
- Confirm Oppo Reno 8 5G CPH2359 matches your exact device model and that the phone uses the MT6893 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (24.7 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Oppo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick an Oppo device, you must use a stock ROM that matches your specific model and chipset. Depending on the hardware, this typically involves using tools like SP Flash Tool for…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Oppo Reno 8 5G CPH2359 free to download?
Yes, Oppo Reno 8 5G CPH2359 can be downloaded free of charge from this page.
How large is the download?
The Oppo Reno 8 5G CPH2359 package is 24.7 GB.
Which tool do I need to flash Oppo Reno 8 5G CPH2359?
Oppo Reno 8 5G CPH2359 is MediaTek MT6893 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Oppo devices. Always confirm it matches your specific model before flashing.