Oppo Reno 2 Z CPH1945
Oppo Reno 2 Z CPH1945 is a Oppo firmware file listed under Oppo, distributed as Oppo_Reno_2_Z_CPH1945_MT6779_EX_11_A.18_191227.zip with a download size of 6.83 GB. It is built for the MediaTek MT6779 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 23 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Oppo Reno 2 Z CPH1945
Looking for the official stock firmware for your Oppo Reno 2 Z CPH1945? You're in the right place. Below is the original Oppo flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Oppo Reno 2 Z CPH1945 to factory condition. File Name: Oppo_Reno_2_Z_CPH1945_MT6779_EX_11_A.18_191227.zip File Size: 6.83 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Oppo Reno 2 Z CPH1945 should run like a brand new unit.
File Details
| File name | Oppo Reno 2 Z CPH1945 |
|---|---|
| Package | Oppo_Reno_2_Z_CPH1945_MT6779_EX_11_A.18_191227.zip |
| Brand / Platform | Oppo |
| Category | Oppo |
| Chipset | MediaTek MT6779 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 6.83 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Oppo Reno 2 Z CPH1945 with SP Flash Tool
- Confirm Oppo Reno 2 Z CPH1945 matches your exact device model and that the phone uses the MT6779 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (6.83 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Oppo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick an Oppo device, you must use a stock ROM that matches your specific model and chipset. Depending on the hardware, this typically involves using tools like SP Flash Tool for…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Oppo Reno 2 Z CPH1945 free to download?
Yes, Oppo Reno 2 Z CPH1945 can be downloaded free of charge from this page.
How large is the download?
The Oppo Reno 2 Z CPH1945 package is 6.83 GB.
Which tool do I need to flash Oppo Reno 2 Z CPH1945?
Oppo Reno 2 Z CPH1945 is MediaTek MT6779 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Oppo devices. Always confirm it matches your specific model before flashing.