Oppo Realme 2 Pro RMX1807
Oppo Realme 2 Pro RMX1807 is a Oppo firmware file listed under Oppo, distributed as Oppo_Realme_2_Pro_RMX1807_11_A.05_180926_QFIL.zip with a download size of 4 GB. It is built for Qualcomm-based devices. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Oppo Realme 2 Pro RMX1807
If your Oppo Realme 2 Pro RMX1807 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Oppo flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Oppo_Realme_2_Pro_RMX1807_11_A.05_180926_QFIL.zip File Size: 4 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Oppo Realme 2 Pro RMX1807 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Oppo Realme 2 Pro RMX1807 |
|---|---|
| Package | Oppo_Realme_2_Pro_RMX1807_11_A.05_180926_QFIL.zip |
| Brand / Platform | Oppo |
| Category | Oppo |
| Platform | Qualcomm |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 4 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Oppo Realme 2 Pro RMX1807 with QFIL
- Confirm Oppo Realme 2 Pro RMX1807 matches your exact device model and that it is intended for Oppo hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (4 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- Oppo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick an Oppo device, you must use a stock ROM that matches your specific model and chipset. Depending on the hardware, this typically involves using tools like SP Flash Tool for…
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
Frequently asked questions
Is Oppo Realme 2 Pro RMX1807 free to download?
Yes, Oppo Realme 2 Pro RMX1807 can be downloaded free of charge from this page.
How large is the download?
The Oppo Realme 2 Pro RMX1807 package is 4 GB.
Which tool do I need to flash Oppo Realme 2 Pro RMX1807?
Oppo Realme 2 Pro RMX1807 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
Which devices is this firmware for?
This file is intended for Oppo devices. Always confirm it matches your specific model before flashing.