Oppo R9 Plus X9079
Oppo R9 Plus X9079 is a Oppo firmware file listed under Oppo, distributed as Oppo_R9_Plus_X9079_EX_11_A.13_170608_QPST.zip with a download size of 1.40 GB. It is built for Qualcomm-based devices. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Oppo R9 Plus X9079
Looking for the official stock firmware for your Oppo R9 Plus X9079? You're in the right place. Below is the original Oppo flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Oppo R9 Plus X9079 to factory condition. File Name: Oppo_R9_Plus_X9079_EX_11_A.13_170608_QPST.zip File Size: 1.40 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Oppo R9 Plus X9079 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Oppo R9 Plus X9079 |
|---|---|
| Package | Oppo_R9_Plus_X9079_EX_11_A.13_170608_QPST.zip |
| Brand / Platform | Oppo |
| Category | Oppo |
| Platform | Qualcomm |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 1.40 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Oppo R9 Plus X9079 with QFIL
- Confirm Oppo R9 Plus X9079 matches your exact device model and that it is intended for Oppo hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.40 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- Oppo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick an Oppo device, you must use a stock ROM that matches your specific model and chipset. Depending on the hardware, this typically involves using tools like SP Flash Tool for…
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
Frequently asked questions
Is Oppo R9 Plus X9079 free to download?
Yes, Oppo R9 Plus X9079 can be downloaded free of charge from this page.
How large is the download?
The Oppo R9 Plus X9079 package is 1.40 GB.
Which tool do I need to flash Oppo R9 Plus X9079?
Oppo R9 Plus X9079 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
Which devices is this firmware for?
This file is intended for Oppo devices. Always confirm it matches your specific model before flashing.