Oppo Mirror 3 3006
Oppo Mirror 3 3006 is a Oppo firmware file listed under Oppo, distributed as Oppo_Mirror_3_3006_11_A.09_150505_QPST.zip.17_200905_RFT.zip.23_200826_RFT.zip.zip with a download size of 1.16 GB. It is built for Qualcomm-based devices. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 18 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Oppo Mirror 3 3006
Looking for the official stock firmware for your Oppo Mirror 3 3006? You're in the right place. Below is the original Oppo flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Oppo Mirror 3 3006 to factory condition. File Name: Oppo_Mirror_3_3006_11_A.09_150505_QPST.zip.17_200905_RFT.zip.23_200826_RFT.zip.zip File Size: 1.16 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the Oppo Mirror 3 3006 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Oppo Mirror 3 3006 |
|---|---|
| Package | Oppo_Mirror_3_3006_11_A.09_150505_QPST.zip.17_200905_RFT.zip.23_200826_RFT.zip.zip |
| Brand / Platform | Oppo |
| Category | Oppo |
| Platform | Qualcomm |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 1.16 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Oppo Mirror 3 3006 with QFIL
- Confirm Oppo Mirror 3 3006 matches your exact device model and that it is intended for Oppo hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.16 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- Oppo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick an Oppo device, you must use a stock ROM that matches your specific model and chipset. Depending on the hardware, this typically involves using tools like SP Flash Tool for…
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
Frequently asked questions
Is Oppo Mirror 3 3006 free to download?
Yes, Oppo Mirror 3 3006 can be downloaded free of charge from this page.
How large is the download?
The Oppo Mirror 3 3006 package is 1.16 GB.
Which tool do I need to flash Oppo Mirror 3 3006?
Oppo Mirror 3 3006 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
Which devices is this firmware for?
This file is intended for Oppo devices. Always confirm it matches your specific model before flashing.