Oppo F1 Plus X9009
Oppo F1 Plus X9009 is a Oppo firmware file listed under Oppo, distributed as Oppo_F1_Plus_X9009_MT6755_EX_11_A.22_160910_5.1.zip with a download size of 1.55 GB. It is built for the MediaTek MT6755 chipset and runs Android 5.1 (Lollipop). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 18 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Oppo F1 Plus X9009
Looking for the official stock firmware for your Oppo F1 Plus X9009? You're in the right place. Below is the original Oppo flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Oppo F1 Plus X9009 back to square one. File Name: Oppo_F1_Plus_X9009_MT6755_EX_11_A.22_160910_5.1.zip File Size: 1.55 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Oppo F1 Plus X9009 should run like a brand new unit.
File Details
| File name | Oppo F1 Plus X9009 |
|---|---|
| Package | Oppo_F1_Plus_X9009_MT6755_EX_11_A.22_160910_5.1.zip |
| Brand / Platform | Oppo |
| Category | Oppo |
| Chipset | MediaTek MT6755 |
| Android version | Android 5.1 (Lollipop) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.55 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Oppo F1 Plus X9009 with SP Flash Tool
- Confirm Oppo F1 Plus X9009 matches your exact device model and that the phone uses the MT6755 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.55 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Oppo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick an Oppo device, you must use a stock ROM that matches your specific model and chipset. Depending on the hardware, this typically involves using tools like SP Flash Tool for…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Oppo F1 Plus X9009 free to download?
Yes, Oppo F1 Plus X9009 can be downloaded free of charge from this page.
How large is the download?
The Oppo F1 Plus X9009 package is 1.55 GB.
Which tool do I need to flash Oppo F1 Plus X9009?
Oppo F1 Plus X9009 is MediaTek MT6755 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Oppo F1 Plus X9009?
This firmware is Android 5.1 (Lollipop).
Which devices is this firmware for?
This file is intended for Oppo devices. Always confirm it matches your specific model before flashing.