Oppo A37
Oppo A37 is a Oppo firmware file listed under Oppo, distributed as Oppo_A37_MSM8916_11.A.22_INT_022_20170522_5.1.1_QFIL.zip with a download size of 1 GB. It is built for the Qualcomm MSM8916 chipset and runs Android 5.1 (Lollipop), with a firmware build date of May 22, 2017. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 20 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Oppo A37
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Oppo A37 owners, this page hosts the original Oppo stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Oppo A37 back to square one. File Name: Oppo_A37_MSM8916_11.A.22_INT_022_20170522_5.1.1_QFIL.zip File Size: 1 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Oppo A37 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Oppo A37 |
|---|---|
| Package | Oppo_A37_MSM8916_11.A.22_INT_022_20170522_5.1.1_QFIL.zip |
| Brand / Platform | Oppo |
| Category | Oppo |
| Chipset | Qualcomm MSM8916 |
| Android version | Android 5.1 (Lollipop) |
| Build date | May 22, 2017 |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Oppo A37 with QFIL
- Confirm Oppo A37 matches your exact device model and that the phone uses the MSM8916 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- Oppo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick an Oppo device, you must use a stock ROM that matches your specific model and chipset. Depending on the hardware, this typically involves using tools like SP Flash Tool for…
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
Frequently asked questions
Is Oppo A37 free to download?
Yes, Oppo A37 can be downloaded free of charge from this page.
How large is the download?
The Oppo A37 package is 1 GB.
Which tool do I need to flash Oppo A37?
Oppo A37 is Qualcomm MSM8916 firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
What Android version is Oppo A37?
This firmware is Android 5.1 (Lollipop), built on May 22, 2017.
Which devices is this firmware for?
This file is intended for Oppo devices. Always confirm it matches your specific model before flashing.