Lava

Lava Z52 Pro

Lava_Z52_Pro_16_V1.0_S122_20190820_SPD.zip.zip.zip
June 16, 2026 Lava 1 GB Lava

Lava Z52 Pro is a Lava firmware file listed under Lava, distributed as Lava_Z52_Pro_16_V1.0_S122_20190820_SPD.zip.zip.zip with a download size of 1 GB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of August 20, 2019. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 10 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About Lava Z52 Pro

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Lava Z52 Pro owners, this page hosts the original Lava stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Lava Z52 Pro to factory condition. File Name: Lava_Z52_Pro_16_V1.0_S122_20190820_SPD.zip.zip.zip File Size: 1 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Lava Z52 Pro restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameLava Z52 Pro
PackageLava_Z52_Pro_16_V1.0_S122_20190820_SPD.zip.zip.zip
Brand / PlatformLava
CategoryLava
PlatformUnisoc (Spreadtrum)
Build dateAugust 20, 2019
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1 GB
Date addedJune 16, 2026
PriceFree

How to flash Lava Z52 Pro with SPD ResearchDownload

  1. Confirm Lava Z52 Pro matches your exact device model and that it is intended for Lava hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Lava Z52 Pro free to download?

Yes, Lava Z52 Pro can be downloaded free of charge from this page.

How large is the download?

The Lava Z52 Pro package is 1 GB.

Which tool do I need to flash Lava Z52 Pro?

Lava Z52 Pro is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava